Flooring Contractor in Burbank, CA - Coated and Polished Concrete Done in Order
Artisan Epoxy Floors of West Hollywood is a flooring contractor serving Burbank, CA. We coat, polish, stain and resurface concrete floors in garages, basements, homes and businesses, starting from a slab we've tested and prepared.
- Epoxy Floor Coatings
- Commercial & Industrial Epoxy Floor Coatings
- Garage Floor Coatings
- Polyaspartic Floor Coatings
- Metallic Epoxy Flooring
- Urethane Cement Flooring
- Polished Concrete Flooring
- Stained Concrete Flooring
- Terrazzo Flooring
- Basement Flooring
- Concrete Grinding & Surface Preparation
- Concrete Sealing
- Concrete Resurfacing & Overlays
- Self-Leveling Concrete & Overlays
- Pool Deck Coatings & Resurfacing
- Concrete Floor Stripping & Removal
- Licensed and insured.
- Free estimates at your property.
- Expect a reply within 1 business day.
Burbank floors we see, from garages to shops
We're a flooring contractor based in West Hollywood, CA, and Burbank is one of the cities around it in Los Angeles County where our crew works. Calls here come from homeowners with garages and spare rooms, from houses up toward the Stough Canyon trails, and from shops and offices around the Airport District. It's the same work we do next door in Glendale and farther south in Inglewood.
Price on a Burbank floor moves with its size, how much grinding and crack repair the slab needs, whether an old coating has to be stripped, and the system you choose. The schedule turns on that same prep and on how long each coat has to cure before you walk or park on it, so the visit to your property is where your own figure and timeline come from. Most of what decides the job sits under the surface, which is why I look at the slab before we talk about finishes.
Why Burbank slabs need prep before coating
- A lot of garages here double as workshops or storage, so oil, paint drips and old sealers have soaked into the concrete and need to be ground out first.
- Older slabs often carry cracks, low spots or a patchwork of earlier coatings, and a new floor only holds up as well as the repairs underneath it.
- Concrete poured on the ground can push moisture up through the slab, which is why we test it before choosing a coating instead of guessing.
Floor services we offer in Burbank
Epoxy Floor Coatings
A good fit for Burbank garages, laundry rooms and workrooms where you want a sealed, wipe-clean floor laid over concrete we've ground and repaired first.
Commercial & Industrial Epoxy Floor Coatings
For Burbank shops, warehouses and service bays, we plan grinding, coating and cure around your hours so the floor only has to close once.
Garage Floor Coatings
When your garage slab has oil stains, tire marks or a peeling store-bought kit, we strip it, grind it and put down a coating made for cars.
Polyaspartic Floor Coatings
A faster-curing coating for Burbank homeowners who need the garage back soon, though it gives less working time, so every bit of prep has to be finished first.
Metallic Epoxy Flooring
For a living area, studio or showroom where you want depth and movement in the floor, poured over a slab that's flat and sound underneath.
Urethane Cement Flooring
Built for Burbank restaurants, commercial kitchens and food spaces that see hot water, spills and daily washdowns, where a standard epoxy would soften or lift.
Polished Concrete Flooring
If your Burbank home or office already has a sound slab, grinding and polishing it gives a hard, glossy floor with no coating sitting on top.
Stained Concrete Flooring
Adds color to plain concrete on patios, in basements or across open rooms, soaking into the surface instead of sitting on it, then sealed to protect it.
Terrazzo Flooring
For a lobby, entry or main room where you want a long-lasting decorative floor, with chips set in a binder and ground smooth right on site.
Basement Flooring
Turns a bare basement or below-grade room in your Burbank house into usable space, with a floor system picked for concrete that sits below ground.
Concrete Grinding & Surface Preparation
The first step under almost every floor we lay, grinding off old glue, paint and sealer so the new coating grips clean, open concrete.
Concrete Sealing
A clear sealer for garage, patio or shop concrete you like as it is, so stains and water soak in less and cleanup gets easier.
Concrete Resurfacing & Overlays
When a Burbank driveway, patio or interior slab is worn, flaking or patched, an overlay gives it a new surface without tearing out the concrete.
Self-Leveling Concrete & Overlays
When an older slab has dips and humps, we pour a self-leveling mix that spreads itself flat, so the tile, vinyl or coating on top sits even.
Pool Deck Coatings & Resurfacing
For a Burbank pool deck that's cracked, faded or slick, we repair the concrete, then resurface or coat it with a texture that grips when wet.
Concrete Floor Stripping & Removal
When an old floor is failing, we remove the epoxy, tile, carpet glue or paint, because a new floor can't hold onto a layer that's letting go.
- Request an estimate
Get a free on-site floor estimate in Burbank
Send the form and we'll reply within one business day to set a time. I come out to your Burbank property to look at the floor and plan the job, and the estimate is free with no obligation. If you go ahead, our own crew does the work.
(213) 329-1493Burbank flooring questions we hear on estimates
How much does an epoxy garage floor cost in Burbank?
The cost of a Burbank garage floor is set by your slab and the finish you pick, so you get your own figure from the estimate after I've seen the concrete. A solid color usually costs less than decorative flakes scattered across the wet coat or a metallic finish, and polishing a sound slab can cost less than coating it. A slab that needs little grinding and no stripping keeps the number down.
Who needs a contractor license for flooring work in Burbank?
The business doing your floor needs a California contractor license from the state licensing board when the job needs a building permit, uses any other workers, or costs $1,000 or more in labor and materials. That state rule applies in Burbank the same as anywhere else in California. We're licensed and insured, and during the estimate we check whether your job needs a permit and handle the application and the city's paperwork when it does.
When is a small flooring job exempt from the California license rule?
A small job is exempt only when it needs no building permit, uses no employees, and its labor, materials and all other costs come to less than $1,000, counting every contract on the job. That limit was $500 before 2025, so older advice you find online may quote the lower figure. The board doesn't allow a bigger project to be split into smaller contracts to get under the line.
What causes epoxy garage floors to peel?
Epoxy garage floors usually peel because a step was skipped or done out of order, most often coating over concrete that wasn't ground open and cleaned first. Oil, old sealer and dust leave nothing for the coating to grab, and moisture rising through the slab, the reason we test first, pushes it off from below. I'd rather plan the slow prep than have you living with a peeling floor.
How long does a garage floor coating take in Burbank?
How long a garage floor coating takes in Burbank turns mostly on the prep the slab needs and how long each coat has to cure, not on laying the coating itself. Stripping an old coating or filling cracks adds time, and a faster-curing polyaspartic shortens the wait before you can park on it. I walk you through the order and timing for your floor at the estimate, before any work starts.
Does Burbank have its own building rules on top of state code?
Yes, the state's Building Standards Commission lists a Burbank ordinance among the local building-standards ordinances filed with it, and building standards are the rules for how buildings are built. The City of Burbank is the local government here, so the city's rules apply to your property along with the state's. I look at what bears on your floor when I plan the job.
Call about your Burbank floor today
Call (213) 329-1493 any day from early morning until 11 PM, or send the form, and tell us what's on your slab now so I can plan the visit around it.