Self-Leveling Concrete & Overlays in West Hollywood CA - A Flat Base for New Flooring
Dips and humps in a slab show through any new floor. We sort out the slab first, then pour a level surface ready for it.
- Licensed and insured.
- Free estimates at your property.
- Expect a reply within 1 business day.
Does my concrete floor need self-leveling before new flooring?
Self-leveling concrete is a pourable layer that flattens a concrete slab and prepares it for new flooring. It's the core of the self-leveling concrete and overlays work we do in West Hollywood, CA, when a floor has dips or humps that would show through tile, plank or a coating.
Most people call us when new flooring is about to go down and the slab has low spots, high spots or rough patches left from an old floor. The price mostly depends on how big the floor is, how far it's out of level, and what has to happen before the pour, such as a moisture plan, crack repair or getting old glue off. The schedule depends on the same things, because some of them need a test or a wait we won't skip. If the slab needs concrete grinding and surface preparation first, that goes into the plan too, and your written estimate lists every step in order. If you're comparing contractors, the state license board's flooring class covers preparing any surface for flooring, and its concrete class covers flat concrete work, so it's fair to ask which one a contractor holds.
How we handle self-leveling concrete and overlays
Before we pour, I look at three things on the slab, because leveling goes smoother when they're settled first: moisture, cracks and joints, and any old glue. Once we've agreed on a plan for those, our crew takes the floor down to clean, sound concrete and handles the cracks the way we planned. Then we prime the surface so the leveler bonds to it instead of letting go later. After that we mix and pour in one go, spread the leveler to the height we marked, roll it to let trapped air out, and keep everyone off it until it's ready for the floor that goes on top.
When an old floor or its adhesive has to come up first, that's concrete floor stripping and removal, and we plan it as the first step so it doesn't turn into a surprise on pour day. If the uneven concrete you're dealing with is outside around a pool, that's a different job, and our pool deck coatings and resurfacing work covers it.
Spot leveling for a few low areas
This suits a floor that's mostly flat with a dip or two, often where a wall came out or an old floor was torn up. We level only the areas that need it, so it takes less material and less prep across the room.
Full-floor pour
This suits a floor that's out of level across the whole room or patched in a lot of places. One continuous pour gives you an even surface from wall to wall, which matters most under large tile, long planks or a coating.
If your new flooring is already ordered or an install date is set, call (213) 329-1493 now, so any testing or permit fits before that date.
What happens after you call us about leveling a floor?
I come out myself to plan the job, and our own crew does the work. Here's the order things happen in, so you know what's coming before it reaches your floor.
Call or send a message
Call (213) 329-1493 or use the form, and tell us roughly how big the floor is and whether it's at ground level. Then we set a time for me to come look at it.
I look at the slab
I come out, look at the slab, measure, and ask how you use the space. Then we send a written estimate that lists each step in order, so you can see what the price covers before you decide.
We set the schedule
Once you say yes, we build every test and wait into the schedule, including any permit. The city's permitting office usually processes applications within 3 business days and sends status updates by email, and plan check reviews happen in order of submittal, with staff usually making contact within 4 to 6 weeks.
Our crew does the work
Our crew does the prep, the pour and the cleanup. The work follows the order on your estimate, so no step gets done out of sequence.
Get a written plan for leveling your floor
Send the form and we'll reply within one business day to set up a free estimate at your property, with no obligation. I'll come out, measure and look at the slab before we write anything up.
(213) 329-1493Self-leveling concrete and overlays in West Hollywood, from permits to older slabs
In West Hollywood, the city's building official issues permits for work that alters, repairs, improves or removes any part of a building. Whether leveling your floor falls under that depends on the job, so I check it during the estimate, and when a permit is needed, we handle the application and the city's paperwork for you. On commercial properties, the city requires a licensed contractor for building permits, and we're licensed and insured. We're based in West Hollywood and work across the cities around it in Los Angeles County.
A lot of the floors we level here are slabs at ground level, in older houses, garages being turned into living space and ground-floor storefronts, and many of them carry layers of old flooring and glue from past remodels. That's why the moisture plan and the glue plan usually come first, and we see the same mix on jobs in Beverly Hills and Culver City.
Self-leveling concrete questions from West Hollywood owners
Will self-leveling concrete work on my ground-floor slab?
It usually can, as long as there's a plan for moisture first. Some self-leveling products aren't suited to slabs at or below ground level because of moisture, but most may work over an effective vapor barrier. Before we choose a product, we confirm whether there's a barrier under the slab or plan a moisture system to go under the leveler.
Can old flooring glue on my concrete be a hazard?
Yes, it can, because old adhesive residue may contain asbestos, and one leveler maker's guide warns that removing it mechanically can be hazardous. In this area, the South Coast AQMD sets survey, notification and work practice requirements to prevent asbestos emissions during renovation and demolition. That's why we settle with you how the glue comes off before any leveling starts.
How much does it cost to level a concrete floor in West Hollywood?
Across the US, leveling a concrete floor with self-leveling compound usually costs about $4.50 to $7 per square foot, installed. That's a national figure, not our price, and your floor can come in differently once moisture work, crack repair or glue removal is added. The estimate at your property lists each step, so you can see what's driving your number.
What causes cracks to show up in a self-leveling floor?
Usually it's movement in the slab underneath. One leveler maker's guide says moving joints or cracks in the floor below can transfer up through a self-leveling layer and could crack it. So we decide how each existing crack and joint will be handled before the leveler goes down.
How do I know if my concrete floor is strong enough for self-leveling?
Local building codes govern that, and the flooring and underlayment makers' requirements may supersede them. The industry's standard practice for installing self-leveling underlayment doesn't cover subfloor strength, so it's a separate question worth raising at the estimate.
How do I get ready for a self-leveling estimate in West Hollywood?
Have the rough size of the floor in square feet ready, and know whether the slab sits at ground level. Tell us about any old glue or cracks you've noticed, because those shape the plan. Then call (213) 329-1493, email team@westhollywoodepoxyflooringandconcretepolishing.com or use the form.
Related services that often come with leveling
If carpet, tile or vinyl is still down, or old adhesive coats the slab, this is the work that gets the concrete bare before any leveling can begin.
When the uneven or worn concrete you're dealing with is outdoors around a pool, this is the page for coating or resurfacing that deck instead.
Get your floor's leveling plan on paper
Call (213) 329-1493 seven days a week until 11 PM, or use the form, and we'll set a time for me to look at your slab.