Flooring Contractor in La Cañada Flintridge - Floors Planned for Hillside Homes
Artisan Epoxy Floors of West Hollywood is a flooring contractor based in West Hollywood, CA, coating, polishing and resurfacing concrete floors for homes and businesses in La Cañada Flintridge, from garages and basements to pool decks.
- Epoxy Floor Coatings
- Commercial & Industrial Epoxy Floor Coatings
- Garage Floor Coatings
- Polyaspartic Floor Coatings
- Metallic Epoxy Flooring
- Urethane Cement Flooring
- Polished Concrete Flooring
- Stained Concrete Flooring
- Terrazzo Flooring
- Basement Flooring
- Concrete Grinding & Surface Preparation
- Concrete Sealing
- Concrete Resurfacing & Overlays
- Self-Leveling Concrete & Overlays
- Pool Deck Coatings & Resurfacing
- Concrete Floor Stripping & Removal
- Licensed and insured.
- Free estimates at your property.
- Expect a reply within 1 business day.
La Cañada Flintridge floors as we find them
La Cañada Flintridge is mostly single-family homes, many on hillside lots with steep driveways and garages set into the slope or tucked under the house, plus a small stretch of shops, offices and restaurants. We've been based in West Hollywood since 2017, and the calls we get here look a lot like the ones from Glendale and Pasadena next door: garage floors, lower-level rooms and pool decks that need more than another coat of paint.
On these lots the slab and the driveway decide more than the square footage does. What usually moves the price and the schedule is how much the concrete needs before any coating goes on and how hard it is to get our grinders up to the garage, so I give you your own number after I've seen both.
Garage and basement slabs here need testing first
- Garages built into a slope can sit against damp soil, so I test the slab for moisture before we pick a coating, because trapped moisture is what lifts one.
- Plenty of garage floors here have been painted, sealed or patched over the years, and we grind those layers off first because a new coating only grips clean concrete.
- A lot of households use the garage as a workshop or gym as much as a place to park, so we match the coating to the hardest use the floor will see.
Floor services for La Cañada Flintridge properties
Epoxy Floor Coatings
A good fit for garages, laundry rooms and workshops in La Cañada Flintridge homes, once we've ground the slab and checked it so the coating holds.
Commercial & Industrial Epoxy Floor Coatings
For shops, offices and storage rooms in the city's small commercial stretch, we plan the work around your hours so you don't have to close twice.
Garage Floor Coatings
Garages under the house or at the top of a steep drive collect tire marks, dripped oil and grit, and a coated floor sweeps clean and resists stains.
Polyaspartic Floor Coatings
When you need the garage back sooner, a polyaspartic coating cures faster than standard epoxy, though it gives us less working time, so we plan each section carefully.
Metallic Epoxy Flooring
For a finished basement, home gym or showroom, metallic epoxy gives a glossy, marbled look, and it shows every flaw underneath, so slab prep matters most here.
Urethane Cement Flooring
Restaurant kitchens and wash areas that see hot water and hard cleaning every day do better with urethane cement, which takes heat and moisture better than epoxy.
Polished Concrete Flooring
If your slab is sound, we can grind and polish it into a glossy floor for an addition, studio or retail space, with no coating to wear off.
Stained Concrete Flooring
Stain soaks into the concrete for warm, varied color on patios, entries or a basement floor, and we seal it afterward so it stands up to foot traffic.
Terrazzo Flooring
We pour and grind terrazzo for entries, hallways and lobbies where you want a polished stone-chip floor that handles heavy foot traffic for years.
Basement Flooring
Lower-level rooms become usable space with the right floor, and we choose between a coating, a polish or an overlay only after testing the slab underneath.
Concrete Grinding & Surface Preparation
Every coating we put down starts here, grinding away old paint and sealer so the new floor bonds to bare concrete instead of the last owner's work.
Concrete Sealing
A clear sealer helps keep stains and water out of driveways, patios and garage floors that don't need a full coating, and it's the lightest option we offer.
Concrete Resurfacing & Overlays
When a patio, walkway or garage slab is worn, pitted or patched but still solid underneath, an overlay gives it a new surface without tearing it out.
Self-Leveling Concrete & Overlays
Slabs that dip or slope where they shouldn't get a self-leveling layer first, so the coating or finished floor that follows goes down flat and even.
Pool Deck Coatings & Resurfacing
Pool decks with cracks, faded paint or a slick finish get repaired and recoated with a textured surface that gives wet feet some grip.
Concrete Floor Stripping & Removal
When a floor has peeling epoxy, tile adhesive or carpet glue, we strip it to bare concrete, because coating over a failing layer just repeats the failure.
- Request an estimate
Get a free on-site floor estimate in La Cañada Flintridge
Expect a reply within one business day to set a time, and then I come out to your La Cañada Flintridge home or business myself to look at the floor and plan the job with you. The estimate is free and there's no obligation, and if you go ahead, our own crew does the work.
(213) 329-1493La Cañada Flintridge flooring questions we hear
How do I know if my garage floor project needs a permit in La Cañada Flintridge?
The city's Building and Safety Division is the office to ask, because its Building Official issues building permits in La Cañada Flintridge, and the city's rules I've read don't settle floor coatings either way. We check whether your job needs one during the estimate, and when it does, we handle the application and the city's paperwork. Tell us early if your property has an open code enforcement case or an expired permit, because the city won't issue a new permit there unless it resolves that case or covers the expired work.
How long does a building permit stay valid in La Cañada Flintridge?
Under the city's proposed building code amendment, a permit expires if work doesn't start within 180 days of the date it's issued, or if work stops for 180 days once it's begun. That's one reason I'd rather apply once the schedule is set than months ahead. You can see where a permit stands on ConnectLCF, the city's online permit portal.
Does a flooring contractor in California need a state license?
Yes, if the job needs a building permit, uses employees, or comes to $1,000 or more in labor and materials combined, the Contractors State License Board requires a current, valid license. That covers most coating and resurfacing work, so ask anyone you're comparing to show you theirs. We're licensed and insured.
How much can a contractor ask for up front in California?
A contractor can't ask for or take more than $1,000 or 10 percent of the total contract price as a down payment, whichever is less. That's the state board's rule, and it's worth knowing before you sign with anyone.
How much does an epoxy garage floor cost in La Cañada Flintridge?
Your price comes mostly from the condition of your slab and the system you choose, so I give you a number once I've seen the floor. Cracks to repair, what the moisture test shows, how many old layers we grind off, the size of the area and whether you pick a basic coating, a flake finish or metallic epoxy all move it. A garage up a steep driveway can also add setup time.
What causes epoxy garage floors to peel in La Cañada Flintridge homes?
Most peeling comes from a step skipped or done out of order, usually coating a damp slab, a sealed or dirty surface, or an old coating that was already letting go. That's why we run the moisture testing and grinding I mentioned above before anything goes down, even when it adds a day to the schedule. I'd rather plan the slow part than come back to a floor that's lifting.
Plan your La Cañada Flintridge floor with us
Call (213) 329-1493 or use our contact form before you paint or seal the slab again, because every new layer on it now is one more we'd have to grind off later.