Garage Floor Coatings in West Hollywood CA - a coating that grips the slab
If your garage floor is worn, stained or peeling, we test and grind the slab first so the new coating has something to grip.
- Licensed and insured.
- Free estimates at your property.
- Expect a reply within 1 business day.
What does it take to coat a garage floor in West Hollywood?
A garage floor coating in West Hollywood is a multi-coat epoxy system, usually a base coat, decorative chips and a clear topcoat, laid over a slab that's been checked and ground so the coating bonds to the concrete and the topcoat protects it.
Most garages we see have a slab that's worn smooth, marked with oil, or carrying an old coat of paint that's started to lift. At Artisan Epoxy Floors of West Hollywood, we've been doing this since 2017 across West Hollywood and the cities around it in Los Angeles County. The price usually turns on the size of the garage, how much grinding and surface preparation the slab needs, and whether there's old paint or cracks to deal with first. The schedule turns on two things nobody can rush, the moisture check and the cure before you park, so your written estimate gives you the figure for your garage and every step in order. California's contractor license board counts preparing the surface as part of a flooring contractor's job, which is how I see it too, and we're licensed and insured.
How we put down a garage floor coating
First we check the slab for moisture, since there's no point grinding a floor that can't be coated yet. Then our crew grinds it, because most garage floors are worn smooth from years of use and the coating needs a rough surface to grab, and one coating maker's guide warns that smooth, poorly prepared concrete keeps epoxy from gripping fully and may lead to peeling. On the clean, ground slab we lay a primer when the floor calls for one, then the epoxy base coat, then the decorative chips, then a clear topcoat that does the protecting. When we're done, I tell you when you can walk and park on it again, going by the product's own guidance. If you're comparing quotes, ask each crew how they prepare the floor, because that's where the bond comes from, and our work is backed by our satisfaction guarantee.
Epoxy with chips isn't the only way to finish a garage. Some homeowners ask about polyaspartic floor coatings, and others want the look of metallic epoxy flooring, and I'm glad to talk through either one when I'm at your house.
Full chip coverage
Chips cover the base coat edge to edge, so you see a speckled floor and very little of the color underneath. It suits a garage that holds cars, tools and boxes, because the busy pattern hides small marks and patched spots.
Light chip scatter
Chips go down more thinly, so more of the base color shows through. It suits someone who wants a plainer, cleaner look, like a garage that doubles as a home gym or a workshop.
If your garage floor is already peeling or you have a date you need the garage back by, call early, because the moisture check and the waits set the schedule.
What happens when you call us about a garage floor coating?
Here's how a garage job runs from your first call to the day you park on it, and who does each part. I plan it myself, and our own crew does the work.
Call or send the form
Call (213) 329-1493 or send a message through the form, and we get back to you to set a time for me to see the garage.
I look at the slab
I come out, look at the slab, measure, and ask how you use the space, and I check whether your job needs a permit while I'm there. Then we send a written estimate that lists each step in order with the cost for your garage, so you know what you're paying for before anything starts.
We build in every wait
Once you say yes, we set the dates with every test and wait built in, so no step gets squeezed. West Hollywood allows construction from 8 AM to 7 PM, only limited interior work on Saturdays and none on Sundays or city holidays, so we book your days inside those hours.
Our crew does the work
Our own crew grinds, coats and cleans up, and I keep you posted on what's happening on your floor before it happens. When the last coat is down, plan to park elsewhere until the product's wait is over.
Get a written, step-by-step plan for your garage floor
Send the form and we'll reply within one business day to set a time for me to see your garage. The estimate is free, done on site, and comes with no obligation.
(213) 329-1493Garage floor coatings in West Hollywood, permits and slabs
The City of West Hollywood's Building and Safety Division reviews permit applications and inspects construction projects in the city, and whether a garage coating needs a permit isn't something I'll guess at. I check during the estimate, and if your job needs one, we handle the application and the city's paperwork for you. You can also ask the division directly.
A lot of garages here are tight, older spaces that have held cars, storage and a coat or two of paint over the years, so we expect some patching and slow, careful grinding along the edges and steps. We see the same worn, painted slabs on garage jobs in Beverly Hills and Culver City, and we plan those floors in the same order.
Garage floor coating questions from West Hollywood homeowners
How much does a garage floor coating cost in the Los Angeles area?
An epoxy garage floor coating in the Los Angeles area usually costs about $6 to $9 per square foot, and that includes materials, floor preparation and application. Where your garage lands depends on its size and how much prep the slab needs, so your written estimate gives you the figure for your own floor.
How long does a garage floor coating take to cure before I can park on it?
One maker's guide says to wait at least 24 hours before walking on its epoxy and at least 72 hours before light vehicle traffic, at 68°F. The same maker says its product reaches full chemical resistance after 7 days at 68°F, so plan to keep the car in the driveway for a few days and go easy on spills that first week.
How do I know if my garage slab is too damp to coat?
One coating maker's test is to lay a plastic sheet on the concrete for at least 24 hours, and if condensation forms or the concrete darkens, the floor can't be coated. A damp slab stops the job before it starts, which is why we check before we schedule any grinding.
Will an epoxy garage floor be slippery?
It can be, because epoxy coatings can be slippery, but adding a granular material to the coat makes the surface less slick. If you walk through the garage with wet shoes or use it as a laundry space, tell me at the estimate and we'll plan for it.
What causes bubbles or discoloring in an epoxy garage floor?
One maker's guide says coating in direct sunlight or rising temperatures makes the concrete release gas, which leaves bubbles and pinholes, and it says to plan the work for times out of direct sun. The same maker says its epoxy will discolor where it gets regular ultraviolet light, the part of sunlight that fades finishes, which matters if your garage door stays open for hours.
Is it safe to sand old paint off a garage floor in West Hollywood?
Not always, because scraping, sanding or removing old paint may release lead dust, which is toxic. If your floor has a painted layer, tell us when you call, and ask any crew you're comparing how they'll handle it.
Other finishes to compare for your garage
If you've heard about polyaspartic coatings and want to compare them with epoxy for your garage, this page explains how we handle that work in West Hollywood.
If you'd rather have a poured, swirled finish than chips, start here to see how we lay metallic epoxy and what the prep involves.
Book a look at your garage floor
Have your garage's square footage and a note on any old paint ready when you call (213) 329-1493 or send the form, so I can plan the visit around what's actually on your floor.