Flooring Contractor in Inglewood, CA - Garage and Shop Floors on a Prepared Slab

Artisan Epoxy Floors of West Hollywood is a flooring contractor working in Inglewood, CA. We coat, polish and resurface concrete floors in home garages, shops and small business spaces, and our own crew does the work.

Request an estimate (213) 329-1493

Glossy metallic epoxy floor with swirling gray, white, and copper veining in a dark-walled room.

Licensed and insured.
Free estimates at your property.
Expect a reply within 1 business day.

Inglewood floors as we see them on our jobs

We're a flooring contractor based in West Hollywood, CA, and we work across the cities around it in Los Angeles County, including Inglewood, Hawthorne next door and up in Glendale. Calls here come from homeowners with a tired garage floor, and from property managers and small business owners who need a unit or storefront floor redone without closing twice. We're licensed and insured.

Most of the slabs we see in Inglewood have years of use on them. They often have oil stains, old paint or sealer, patched cracks, and sometimes a coating someone rolled over dirty concrete. What's already on the concrete decides how much grinding and repair come before any coating. That prep moves the price more than anything else, along with the floor's size and the system you pick. The schedule turns on the same prep, plus cure time and whether the city wants a permit, so your own figure comes from the estimate, after I've looked at the floor.

Inglewood slabs and what they usually need first

Older garage slabs here often carry oil stains, paint and layers of sealer, and a new coating won't hold until all of that is ground off.
Cracks, chips and old patches are common, so we repair them before coating, because a crack left under a new floor usually shows back through it.
A slab can hold moisture from the ground below, and a coating over a damp slab tends to lift, so we test it before choosing a system.
Shops and storefronts here usually can't close for long, so I plan the prep and cure around your hours before our crew sets up.

Flooring and concrete services we do in Inglewood

Epoxy Floor Coatings
A tough, easy-to-clean coating for Inglewood garages, laundry rooms and workspaces. We lay it over a slab we've ground and repaired, so it bonds instead of peeling.
Commercial & Industrial Epoxy Floor Coatings
For shops, warehouses and storefronts that take carts, forklifts and daily mopping, a thicker coating system stands up to the traffic and cleans fast.
Garage Floor Coatings
When an older garage slab is stained, dusty or cracked, we grind it, fill the cracks and coat it so oil and tire marks wipe up.
Polyaspartic Floor Coatings
A fast-curing coating for homeowners who can't leave the car on the street for long. It still needs the same careful prep as epoxy.
Metallic Epoxy Flooring
A poured, swirled finish with depth and shine for a home gym, studio, showroom or salon, when you want the concrete to look finished.
Urethane Cement Flooring
For restaurant kitchens and food spaces that see hot water, grease and heavy cleaning, this cement-based system holds up where an ordinary coating would struggle.
Polished Concrete Flooring
When the slab is sound, we grind and polish it to a hard, glossy surface for lofts, offices and retail spaces, with nothing on top to peel.
Stained Concrete Flooring
The color soaks into the concrete itself, which suits patios, entries and living areas where you want a warm, varied look rather than a solid coating.
Terrazzo Flooring
For lobbies, entries and storefronts that want a long-lasting patterned floor, we set chips in a resin or cement base and grind it smooth.
Basement Flooring
Basement and lower-level rooms get a floor system chosen for the slab we find there, so the space works as a gym, storage room or playroom.
Concrete Grinding & Surface Preparation
Most floor failures trace back to this step. We grind off old paint, glue and sealer and open the concrete so the next layer can grip.
Concrete Sealing
A clear coat for driveways, walkways and garage slabs that soak up oil and water. It keeps stains on top, where you can clean them off.
Concrete Resurfacing & Overlays
When a slab is worn, flaking or patched in a dozen places, a thin new layer of concrete gives you a fresh, even surface without tearing it out.
Self-Leveling Concrete & Overlays
For uneven floors in older units and shops, a pourable layer that levels itself flattens the slab, so tile, wood or a coating goes down flat.
Pool Deck Coatings & Resurfacing
Cracked, slick or faded pool decks get repaired and recoated with a textured surface that's easier on bare feet and holds up to splash water.
Concrete Floor Stripping & Removal
When an old coating is peeling, or tile and glue have to come up, we strip the floor down to clean concrete before anything new goes on.
Request an estimate

Get a free on-site floor estimate in Inglewood

Send us a few lines about your Inglewood floor, and we'll reply within one business day to set a time. I'll come out, look at the slab and plan the job with you, and our own crew does the work. The estimate is free and there's no obligation.

(213) 329-1493

Other areas we serve

Inglewood permits, inspections and floor costs

Who issues building permits in Inglewood, CA?

The city's Building Safety Division issues building, electrical, plumbing, sewer, mechanical and grading permits in Inglewood. Its line for permit and inspection questions is (310) 412-5294. Some counter visits, such as over-the-counter permits, need an appointment booked ahead through the city's QLESS system.

Do I need a permit to put an epoxy floor in my Inglewood garage?

You might, because the city requires a building permit whenever a structure is altered, improved or repaired, and that covers repair and improvement work, not just new building. The city's wording doesn't spell out floor coatings, so I check your job against it during the estimate. When a permit is needed, we handle the application and the city's paperwork for you.

How do I request a building inspection in Inglewood?

You request every Building Safety inspection online through the division's OpenGov portal, which has been the rule since March 30, 2026. Each inspection is booked there. When your job has a permit, I plan our steps around those inspections so the work doesn't get ahead of one.

How much does a new garage or shop floor cost in Inglewood?

An Inglewood floor's cost depends mostly on its size, the shape the slab is in and what has to come off before coating, so I give you a figure once I've seen it. Grinding off old paint or sealer, repairing cracks and choosing a thicker or decorative system all raise the price, while a clean, sound slab and a simpler finish keep it lower. If your job needs a permit, the city says the fee varies with the project's type and complexity, and it invites owners to call for a fee estimate.

Does Inglewood review plans before issuing a building permit?

Yes, on work that needs plans, the Building Safety Division checks the drawings before it issues a permit. The division says all projects that require plans will be submitted digitally. If your floor is part of a larger remodel with plans, I'll tell you at the estimate how that review fits into our schedule.

What causes epoxy garage floors to peel in Inglewood?

Most peeling floors I've seen came from prep that was skipped or done out of order, not from the coating itself. A coating rolled over oil, old sealer or a damp slab has nothing solid to grab, so it lifts. We test the slab, grind it open and repair the cracks first, then coat, because that slow part is easier to plan than a peeling floor is to fix.

Tell us about your Inglewood floor

Call (213) 329-1493 or use our estimate form to describe the floor and ask how Inglewood's permit and inspection steps apply, so the plan accounts for them before any grinding starts.

Request an estimate (213) 329-1493